User`s manual

34
Switch(config-if-PORT-PORT)# security
storm-protection broadcast
Enable the selected interfaces‟ broadcast
storm protection function.
Switch(config-if-PORT-PORT)# security
storm-protection multicast
Enable the selected interfaces‟ multicast
storm protection function.
Switch(config-if-PORT-PORT)# security
storm-protection unknown-multicast
Enable the selected interfaces‟ unknown
multicast storm protection function.
Switch(config-if-PORT-PORT)# security
storm-protection unknown-unicast
Enable the selected interfaces‟ unknown
unicast storm protection function.
No command
Switch(config-if-PORT-PORT)# no security
storm-protection
Disable storm protection globally.
Switch(config-if-PORT-PORT)# no security
storm-protection broadcast
Disable broadcast storm protection.
Switch(config-if-PORT-PORT)# no security
storm-protection multicast
Disable multicast storm protection.
Switch(config-if-PORT-PORT)# no security
storm-protection unknown-multicast
Disable unknown multicast storm
protection.
Switch(config-if-PORT-PORT)# no security
storm-protection unknown-unicast
Disable unknown unicast storm
protection.
Show command
Switch(config)# show security
storm-protection interface
[port_list]
[port_list]
Show the selected interfaces‟ security
settings and storm control rates.
Switch(config)# show security storm-
protection interface
Show each interface‟s security settings
including storm control rates.
2. Specify the broadcast, multicast, unknown multicast and unknown unicast storm
protection rates per second.
Security command
Parameter
Description
Switch(config-if-PORT-
PORT)# security storm-
protection rates [8-1048568]
[8-1048568]
Enter the maximum rate per second.
Any broadcast, multicast, unknown
multicast and unknown unicast packet
exceeding the specified value will be
dropped.
No command
Switch(config-if-PORT-PORT)# no security
storm-protection rates
Remove the rate setting. The storm
protection rate will be set to the default
(256kbps).
Show command
Switch(config)# show
security storm-protection
interface [port_list]
[port_list]
Show the selected interfaces‟ security
settings and storm control rates.
Switch(config)# show security storm-
protection interface
Show each interface‟s security settings
including storm control rates.