User`s manual

90 • vacon CONTROL KEYPAD
Tel. [phone] • Fax [phone]
9
Trip counters (S6.8.2)
Trip counters (menu S6.8.2) are counters the values of which can be reset i.e. restored to zero. You
have the following resettable counters at your disposal. See Table 9-6 for examples.
Note! The trip counters run only when the motor is running.
Page
Counter
T6.8.2.1
MWh counter
T6.8.2.3
Operation day counter
T6.8.2.4
Operation hour counter
Table 9-7. Resettable counters
The counters can be reset on pages 6.8.2.2 (Clear MWh counter) and 6.8.2.5 (Clear Operation time
counter) .
Example: When you want to reset the operation counters you should do the following:
Figure 9-24. Counter reset
Software (S6.8.3)
The Software information page includes information on the following frequency converter software
related topics:
Page
Content
6.8.3.1
Software package
6.8.3.2
System software version
6.8.3.3
Firmware interface
6.8.3.4
System load
Table 9-8. Software information pages
T1T5
READY
R EA DY READY
enter
READY READY
STOP
STOP
STOP STOP
READYSTOP
Trip counters
Clr Optime cntr Clr Optime cntr
Not reset Not reset
Clr Optime cntr
Reset
Clr Optime cntr
Reset
Clr Optime cntr
Not reset