User Manual

MCN Remote Comparator Display Appendix A
CTI Products, Inc. Changing Status Message Text
68-10856-210
88
After the Group Configuration File is created, the Screen Configuration File can
be created. Figure 37 shows the MCNRCD display for the screen configuration
entered.
Figure 37 - Multiple Category Screen File
Using this screen configuration, along with the MCNRCD.CFG file given in
Figure 34, we can now display status messages customized for each MCN I/O
device in our system. Table 7 shows which status text will be displayed by
MCNRCD for each MCN I/O module when the specific input values are received.
Input
Value
Comparator
I/O Module
Input/Output
Control Module 1
Input/Output
Control Module 2
01 Vote Active On
04 Rx Fail Off
10 Dis Err Run
50 Dis Err Stop
44 Fail Access Err
Table 7 - Multiple Category Text Display
The output controls for each category in Figure 37 are setup to operate as shown
in Table 8.