User Manual

MCN Remote Comparator Display Running the MCN Comparator Display
CTI Products, Inc. (MCNRCD) Program
68-10856-210
49
The first is
Error
logging, which is used to log only failure information. This
information can be logged to the screen, the disk or both. The
S
how Errors On
Screen [ ] box enables the program’s status line to display the error message
received.
The second type of logging is
Statistics
logging, which is used to log all changes
from all Comparator I/O modules. This information can only be logged to the
disk. When statistics logging is enabled, any modules errors that occur (modules
falling off-line, etc.) are displayed on the screen as well as being logged to the file.
Only one of the two types of logging (Statistical or Error) may be enabled at a
time
. The type of logging desired is selected from the
Logging Options
menu of
MCNRCD, as shown in Figure 28.
Logging Options selections are saved in the MCNRCD.INI file
, so they take
effect each time you restart the MCNRCD program.
Figure 28 - Logging Options Dialog Box