User Manual

MCN Remote Comparator Display Configuring a System

CTI Products, Inc. Using MCNCFG

68-10856-210

6.4.2 Defining a Group Number

Using the Edit Group Number menu command, you can define the MCN Group

for the Comparator I/O Modules being monitored. Figure 5 shows the pull-down

Edit Menu during Group Configuration.

Figure 5 - Group Configuration Edit List

Figure 6 shows the dialog box that appears when the Group Number menu

command is executed. Enter a new Group number in the range shown on the

screen. Again, this Group number is the Group number assigned to the

Comparator I/O Modules that will be defined in this Group Configuration File.