Owner's manual

MCNConfig Program: Importing a System from MCNRCD for DOS
132 68-11824-210
Imported Receivers Window
The program gets the Receivers information from the .GCF and .MCF files.
Name This is taken from the Receiver Name from the .GCF file.
Description This is taken from the Corresponding Channel Name /
Notes field in the .GCF file.
Table This is the Status Table used by the old DOS program. It is
based on the entry in the .MCF file. In the DOS program,
Status Tables were assigned on a module (CIB, IOB, etc.)
basis. In the new Windows program, the Status Tables are
assigned per receiver (or I/O Block).
Imported Status Tables
The program gets the Status Tables from the MCNRCD.CFG file. Normally, you will just have the
Default entry. If you have a specially modified MCNRCD.CFG file, you may see additional entries in
the Status Table drop-down list in the Receivers Window.
The above example is from a customer who uses a lot of alarms & controls in his system.
He has 17 custom Status Tables! (Thanks, John!)