User guide

RadioPro Dispatch Installation and Configuration Guide

E-Mail & Text Alerts folder

Geo-fence violations may be sent via email or SMS (text

messaging) to any device that can receive these messages. Use the

E-Mail & Text Alerts folder to configure these messages as follows:

1. Select the

E-Mail & Text Alerts folder to display the window

shown at right.

2. Complete the fields in the Outgoing Server (SMTP) section of

this window, then click the

Send Test Email button to verify

that parameters have been entered correctly.

3. Click the button to begin adding contacts that will

receive alerts. Each group can hold multiple contacts.

4. Click the button to add a Mobile Contact, or the

button to add an Email Contact.

5. Complete the required fields for either a Mobile Contact or an Email Contact, then click the Apply button.

Repeat steps 3 & 4 for any additional contacts.

Note: For any geo-fence alerts that should be sent to

a Group of message recipients (configured using the

steps above), be certain to enable that group in the

Condition window of the geo-fence as shown at right.

See Page 35 for more details about Geo-fences and

Geo-fence Conditions.

Toolbar Buttons folder

Custom buttons may be added to the Toolbar. When the Toolbar Buttons folder is selected, the following window will

be displayed.