Installation guide

RadioPro IP Gateway Installation and Configuration Guide
41
Appendix - Rack Mounting
Rack Shelf
A rack shelf can be used to hold the RadioPro IP Gateway and Control Station radio in a standard 19” wide rack. The
two devices can be located next to each other on the same shelf. The following rack shelf is recommended, but others
may be used that have a depth of at least 12”:
Rack Shelf 2RU x 15”, CTI Products # S2-61548,
also available as Cable Organizer #
QES0319-0215:
http://www.cableorganizer.com/computer-cabinets/rack-shelves/single-side-non-vented-shelves.html
Appendix - RadioPro IP Gateway Version Compatibility
RadioPro Dispatch clients, Talk clients, and IP Gateways must have compatible versions in order to communicate with
each other. Compatibility can be ensured when the first two digits of the version match. (The third digit indicates a minor
revision, and does not need to match.)
IP Gateways with Windows 7 installed
IP Gateway – Windows 7 Version
Client Version
(Dispatch, Talk, Solo)
7.0.x 6.0.x 5.1.x 5.0.x 4.0.x 3.2.x 3.1.x
7.0.x
Yes

Yes
*
No No No No No
6.0.x Yes Yes No No No No No
5.1.x No Yes Yes No No No No
5.0.x No No No Yes No No No
4.0.x
      
3.2.x
      
3.1.x
      
IP Gateways with Windows XP installed
IP Gateway – Windows XP Version
Client Version
(Dispatch, Talk, Solo)
7.0.x 6.0.x 5.1.x 5.0.x 4.0.x 3.2.x 3.1.x
7.0.x Yes
Yes
*
No No No No No
6.0.x Yes Yes No No No No No
5.1.x No Yes Yes No No No No
5.0.x No No No Yes No No No
4.0.x No No No No Yes No No
3.2.x No No No No No Yes No
3.1.x No No No No No No Yes
Notes:  Dispatch and Solo client version must be at least 5.0.x to be compatible with Windows 7 IP Gateway.
* Channel-to-channel patching in RadioPro Dispatch is not available.
This feature requires minimum IP Gateway v7.0.x.
 RadioPro Talk requires minimum IP Gateway v7.0.10.