Installation guide

RadioPro IP Gateway Installation and Configuration Guide
34
3) Network tab
Do NOT use leading zeros for any of the address fields.
DHCP should NOT be selected unless an engineer at CTI
Products is consulted.
The default TCP Port # is 48222. This can normally be left
at its default value.
An entry for default Gateway is needed only if RadioPro
clients (Dispatch, Talk, Mobile) will be accessing this IP
Gateway from another network, or the Internet.
An entry for DNS Server is needed only if an NTP server
host name was specified in the General tab (instead of an IP
Address). If an NTP server host name is not specified, then
DNS Server should be blank or “0.0.0.0”.
4) License Key tab
This tab is used to transfer the License File between the IP
Gateway and CTI Products when an upgrade to the License is
purchased. The License File contains two parameters:
 A value between 1 and 100 specifies the number of
simultaneous connections allowed to this IP Gateway
from users of RadioPro Talk clients and RadioPro
Mobile applications.
 The radio model for which this IP Gateway is
configured: MOTOTRBO, NEXEDGE, or BASIC
RxTx.