Installation guide

RadioPro IP Gateway Installation and Configuration Guide
33
f. Enter appropriate parameters for each of the tabs:
1) General tab
Version indicates the current software version of this
RadioPro IP Gateway. RadioPro Software for the IP Gateway
and Clients (Dispatch, Talk, and Mobile for mobile devices)
must all have compatible versions in order to communicate
with each other. Compatibility occurs when the first two
digits of the version match. (The third digit indicates a minor
revision, and does not need to match.)
Gateway Name factory default is “Default Gateway”. If
RadioPro Dispatch client will be used to connect to this IP
Gateway, this name should be changed to a descriptive name
that will be recognizable at the RadioPro Dispatch client. Two
lines of 24 characters each can be displayed to identify a radio
controller in the RadioPro Dispatch client.
Admin Password factory default is “admin”. This password
is needed to make changes to the IP Gateway configuration using ICU.exe. This password should
be changed from the default value to prevent unauthorized changes. This is also the default
password for the Talk client “admin” account. The Talk client “admin” account password may be
modified from a Talk client.
User Password factory default is “user”. This password is needed when adding an IP Gateway in
the “Manage Devices” window of the RadioPro Dispatch client. This password should be changed
from the default value to prevent unauthorized changes.
NTP Server should be enabled when RadioPro Dispatch clients will connect to this IP Gateway,
and should contain the IP Address where the Network Time Server is running. If a Network Time
Server is not accessible by this IP Gateway on its network, then a Time Server should be installed
on an accessible PC; this PC could be one that is running the RadioPro Dispatch Client. Either an
IP address or a name recognized by the Domain Name Server can be entered. See Install Time
Server section of RadioPro Dispatch Software Installation Guide S2-61785 for more details.
Custom Local Time can be used if an NTP Server is not used. Enter the current date and time.
2) Accounts tab
The “admin” account is used for writing new parameters to
the IP Gateway using ICU.exe. The “admin” account is also
the default account for logging into the IP Gateway from a
RadioPro Talk client or RadioPro Mobile application.
The “admin” account cannot be Renamed or Deleted. It is
recommended that the password of the “admin” account be
changed from its default value of “admin” in order to prevent
unauthorized changes. This can be accomplished by selecting
“admin” from the list of accounts, and then clicking the
Change password button. In the Change password
window, type a new password in the Password text box,
retype it in the Retype text box, and then click the OK
button.
User accounts can be added for the purpose of logging into the
IP Gateway from RadioPro Talk clients and RadioPro Mobile applications. Click the Add button.
In the Add account window, enter the new Username, Password, and then click the OK
button.