Installation guide

RadioPro IP Gateway Installation and Configuration Guide
29
f. Disable Data Call Confirmed by removing the check mark from the box. If this parameter is greyed-
out, then ensure that the Enhanced GPS parameter is disabled.
5. Write the CPS parameters to the MOTOTRBO Control Station radio.
SummaryofMOTOTRBOCPSSetupforSubscriberRadios

Folder Sub-Folder Parameter Setting
General Settings Main GPS Enable (if applicable)
Persistent LRRP Save Disable
Persistent LRRP Delete Disable
Network ARS Radio ID
Must match Radio ID of control station connected to IP
Gateway
TMS Radio ID
Must match Radio ID of control station connected to IP
Gateway
Channels
ZoneName,
ChannelName
ARS On System Change
Enhanced GPS Enable (if this option is installed in repeater)
Window Size
5 if Privacy Type is “None” or “Basic”
6 if Privacy Type is “Enhanced”
GPS Revert
If no Data Revert: “Selected”
If Data Revert: “Channel Name” of Data Revert Channel
Data Call Confirmed Disable
Compressed UDP
Data Header
Enable
4e.
4f.