Installation guide

RadioPro IP Gateway Installation and Configuration Guide
26
Step 1c. for MOTOTRBO
Configure Subscriber Radios for ARS, GPS, and TMS
This step is required if ARS, GPS, or Text Messaging Service is needed at the RadioPro client (such as Dispatch, Talk,
or Mobile). This step is not required for a Connect Plus system, since these functions are not available using a Control
Station interface.
Use MOTOTRBO CPS (Motorola’s Customer Programming Software) to configure MOTOTRBO radio parameters using
the following steps.
1. From the View menu, choose Expert.
2. General Settings folder:
a. Enable GPS.
b. In the “Persistent LRRP Requests” section, verify that Save and Delete parameters are “Unchecked”.
2a.
2b.