Installation guide

RadioPro IP Gateway Installation and Configuration Guide

Step 1a. for MOTOTRBO

Configure Control Station Radio(s) using MOTOTRBO CPS

Use MOTOTRBO CPS (Motorola’s Customer Programming Software) to configure MOTOTRBO radio parameters using

the following steps. (CTI Cable S2-61431 may be used as a programming cable instead of the Motorola programming

cable.)

1. From the View menu, choose Expert.

2. General Settings folder:

a. The Radio IDs of the Voice Radio and the Data Revert Radio that share a RadioPro IP Gateway be the

same.

b. Disable GPS.

c. In the “Microphone” section, change Analog Mic AGC and Digital Mic AGC to “Unchecked”.

2a & b

2c.