Installation guide

RadioPro IP Gateway Installation and Configuration Guide
12
CONFIGURATION AND INSTALLATION STEPS
Use the steps in the following table to install a RadioPro System. Each step is discussed in detail starting on Page 13.
Following installation of the IP Gateway in Step 5, at least one Client must be installed from Step 6.
Installation Steps Outline
Step # Description MOTOTRBO NEXEDGE Basic RxTx
1a
Configure Control Station
Radio(s)
S2-61781, page 17
IP Gateway Installation
S2-61781, page 13
IP Gateway Installation
N/A
1b
Configure MOTOTRBO
Connect Plus Option Board
S2-61781, page 25
IP Gateway Installation
(Required only if Connect Plus.)
N/A N/A
1c
Configure MOTOTRBO
Subscriber Radios for ARS,
GPS, and TMS
S2-61781, page 26
IP Gateway Installation
(Required only for ARS, GPS, or
TMS. Not required for Connect Plus.)
N/A N/A
1d
Configure MOTOTRBO
repeater(s) for
Enhanced GPS option
S2-61781, page 30
IP Gateway Installation
(Required only for GPS data using
Enhanced GPS.)
N/A N/A
2
Connect RadioPro IP Gateway
to Control Station Radio
S2-61781, page 30
IP Gateway Installation
S2-61781, page 31
IP Gateway Installation
S2-61781, page 31
IP Gateway Installation
3
Configure RadioPro IP
Gateway(s) using ICU.exe
S2-61781, page 32
IP Gateway Installation
Same
Same
4
Connect RadioPro IP Gateway
to IP Network
S2-61781, page 37
IP Gateway Installation
Same
Same
5
Configure Port Forwarding on
Firewalls/Routers
S2-61781, page 37
IP Gateway Installation
(Required only if RadioPro client is
outside the LAN)
Same
Same
6a
Install and configure RadioPro
Talk Clients
S2-61783
Talk Client Installation
(Optional)
Same
Same
6b
Install and configure RadioPro
Dispatch Clients
S2-61785
Dispatch Client Installation
(Optional)
Same
Same
6c
Install and configure RadioPro
Mobile apps
S2-61787
Mobile App Installation
(Optional)
Same
Same