Owner's manual

PCLTA Installation Manual Model Numbers and Specifications
CTI Products, Inc.
68-11199-135
29
10. Model Numbers and Specifications
Part
Number
Description
S1-60857 MCN RCD Software w/PCLTA Module 78Kb PCI Internal Card for PC
S1-60858 MCN RCD Software w/PCLTA Module 1.25Mb PCI Internal Card for PC
•
78Kb units are for standard systems. 1.25 Mb are for custom-engineered systems.
•
Since the PCLTA card has a direct network connection, it does not support dial-up control of
a remote system.
•
Dial-up monitoring and control can be done with the MCN Remote Comparator Display
software, a HIB module, and a modem.
•
HIB modules and PCLTA modules can be mixed in one system.
General Specifications
ISA Version PCI Version
PC Interface: 16 Bit ISA 32 Bit PCI
Size (HxL) in
cm
2.45x 6.10
6.22 x 15.5
3.87 x 5.20
9.8 x 13.2
PC Bracket Full Height
Address Bytes Required
Starting Address
4
Modulo 4
16
Modulo 4
IRQs Required 1. Can use IRQ1-16.
Configuration Software, PnP
Power Required 5V @250 mA, typical
Temperature 0-70
o
C
Humidity 25 - 90% @ 50
o
C non-condensing
MCN Network Data Rates 78K or 1.25Mb (1250K), depending upon model
Network Connector (1) screw terminal block (2 conductor)
Max. network segment length 4000 ft. (1200 m) (78Kb);
1500 ft. (450 m) (1.25Mb)
Max PCLTA modules per
network segment:
64
(Larger, multi-segment systems can be configured.)
PC Operating System Support
(Software runs in a DOS
window)
Windows 95 / 98,
Windows NT (version 4.0 or higher), XP, 2000
Network Cabling Category 5 UTP
Safety Approvals to: UL 1950, CSA 1950, EN60950-1992 (CE)
Emissions Compliance: FCC part 15, Class A, (complies with Class B)
EN55022, Class B
Software Media CD-ROM