Owner's manual

PCLTA Installation Manual System Considerations
CTI Products, Inc.
68-11199-135
23
7.4 Program Shortcut Icons
The Setup program will make program shortcuts. They are made in the CTI
Products folder and on the Start Programs menu under CTI Products.
If you need to make additional shortcuts for different MS-DOS programs, you can
do the following:
Create (or copy and modify) a
program ‘shortcut’ Icon
for
MCNRCD.EXE
by
using Windows Explorer. This is done in order to assign the CONFIG.SYS and
AUTOEXEC.BAT files (CONFIG.NT and AUTOEXEC.NT for Windows NT) to
the MCNRCD.EXE program. Set the correct path and command line for your
MCNRCD system. You may also enter a batch file to run MCNRCD. An
example MCNRCD program interface file is shown below.
After entering the correct path and command lines, click on the
Windows NT
button to assign the CONFIG.NT (or MCNRCD.NT) and AUTOEXEC.NT files
to this program.
Enter the
name of configuration
file that contains the line:
DEVICE= %SystemRoot% \system32\PCLTDOS.SYS /D1.