Owner's manual

CTI Products, Inc. EXB-IP User Guide
Appendix B – Mounting Options 41
APPENDIX B. MOUNTING OPTIONS
Wall mount and EIA 19” rack mount kits are available as options for the EXB from CTI Products, Inc. The
wall mount kit includes brackets to allow a single EXB module to be mounted to any flat surface. The rack
mount kit includes an adapter allowing up to three EXB modules to be mounted in a single rack unit height.
Rack Mount Option
The rack mount option allows up to three EXB modules to be mounted in a one rack unit height (1.75 inches) of
a standard 19 inch rack. The modules are mounted in the rack plate by removing its’ front bezel and
remounting the module into the rack plate. Figure 6 shows an exploded view of the rack mount installation.
The top diagram shows the front view of the bracket with one module installed. The bottom two diagrams show
a side view of the module installation into the rack adapter and rack adapter installation into the rack,
respectively.
CA-80374-100
FACEPLATE
SPACER
1 2 3 4
5
9
876
ERR
ACT PWR
RESET
WINK
ETH RX
ETH TX
CSVC RSVC
NETWORK
OUT IN
ASYNC
NETWORK
NCB
NETWORK COMBINER
Figure 6 EXB Module Rack Mounting