Owner's manual

CTI Products, Inc. EXB-IP User Guide
IP Configuration – EXB Config 20
All In Channel
If message packets must flow between remote sites and the Central site and also from one remote site to
another remote site, use All In Channel mode.
MAC Refresh
This tells the EXB-IP module to send periodic refresh messages for Ethernet switches and routers that need
them to refresh their ARP cache tables.
State
This indicates whether the IP data in the EXB-IP module matches (Synchronized, green check mark) or does
not match (Not synchronized, red X) the data on the screen. If an EXB-IP module is not connected, then a
Question Mark will be displayed (State Unknown).