Manual

ManualsBrandsCTI Products ManualsComputer AccessoriesCHIB CommandSTAR Lite Host Interface Module

CHIB Hardware Reference Console Configuration / Mapping

CTI Products, Inc.

68-11662-100

9. Console Configuration / Mapping

The CHIB module emulates 5 CommandSTAR Lite I/O boxes. The receiver

status and control signals are mapped to the I/O Box points as shown below.

Typical programming in CSDM Lite is shown in the rightmost two columns. Use

I/O Type H. LEDs are programmed in pairs.

Rx Signal Button/LED Address Relay ID Opto ID Output Input

1 Disable Button 30H 0 1

1 Force Vote Button 30H 1 2

1 Disabled LED 30H 0 1

1 Receive LED 30H 1 1

1 Failed LED 30H 2 2

1 Voted LED 30H 3 2

2 Disable Button 30H 2 3

2 Force Vote Button 30H 3 4

2 Disabled LED 30H 4 3

2 Receive LED 30H 5 3

2 Failed LED 30H 6 4

2 Voted LED 30H 7 4

3 Disable Button 30H 4 5

3 Force Vote Button 30H 5 6

3 Disabled LED 30H 8 5

3 Receive LED 30H 9 5

3 Failed LED 30H 10 6

3 Voted LED 30H 11 6

4 Disable Button 31H 0 7

4 Force Vote Button 31H 1 8

4 Disabled LED 31H 0 7

4 Receive LED 31H 1 7

4 Failed LED 31H 2 8

4 Voted LED 31H 3 8

5 Disable Button 31H 2 9

5 Force Vote Button 31H 3 10

5 Disabled LED 31H 4 9

5 Receive LED 31H 5 9

5 Failed LED 31H 6 10

5 Voted LED 31H 7 10

6 Disable Button 31H 4 11

6 Force Vote Button 31H 5 12

6 Disabled LED 31H 8 11

6 Receive LED 31H 9 11

6 Failed LED 31H 10 12

6 Voted LED 31H 11 12

7 Disable Button 32H 0 13

7 Force Vote Button 32H 1 14

7 Disabled LED 32H 0 13

7 Receive LED 32H 1 13

7 Failed LED 32H 2 14

7 Voted LED 32H 3 14

Pro

rammin

I/O Box