Quick Walkthrough CTERA C200 August 2013 Firmware Version 4.0 © 2013, CTERA Networks. All rights reserved.
Safety Warning Carefully read the Safety Instructions and Operating Procedures provided in this guide before attempting to install or operate the appliance. Failure to follow these instructions may result in damage to equipment and/or personal injuries, and will void your warranty. This product contains no user-serviceable parts. Repair, maintenance and servicing of this appliance are to be carried out only by qualified CTERA personnel.
Tip For more detailed information, refer to the CTERA C Series User Guide, available at http://www.ctera.com/support.
1 Install the C200 Check the Package Contents Verify that the package contains the following items: C200 Ethernet Cable Power Supply Cable Check Required Items Verify that you have the following required items (not included): One or two hard drives (SATA, 3.
Install the C200 1 Connect the C200 1 Open the C200's back cover, by pressing the two plastic tabs and then pulling backwards. Two slots are revealed. 2 Insert a SATA hard drive into the left-hand slot, pressing it firmly until it is all the way in. The drive's metal cover should be facing left. 3 If you have a second hard drive, insert it into the right-hand slot, pressing it firmly until it is all the way in.
Install the C200 1 The drive's metal cover should be facing right. 4 Close the C200's back cover, by inserting first the bottom of the cover, pressing the tabs, and then pushing forwards. The cover should click into place. 5 Connect one end of the Ethernet cable to the LAN port, and connect the other end to your Ethernet LAN switch or router.
Install the C200 1 6 Connect the provided power supply cable to the power jack, and connect the power supply to the wall outlet. 7 Press the Power button at the back of the C200. The C200 will start up, and the Ready/Status LED will flash rapidly in orange and then green. When the LED turns steady green, the C200 is ready. Tip If a DHCP server is not available, then after one minute, the appliance will use the IP address 192.168.192.5.
2 Connect to the C200 Web Interface Windows Vista/7/8 1 On a computer connected to the same switch as the C200, view the network neighborhood, by doing one of the following: In Microsoft Windows 7® or Microsoft Windows 8®, click Start > Computer, then click Network in the left pane. The C200 is automatically detected using UPnP and appears in the list of network places. In Microsoft Windows Vista®, click Start > Network.
Connect to the C200 Web Interface 2 Tip After connecting, you can add a bookmark in your Web browser, for easy access to the C200 Web interface.
3 Set Up the C200 After connecting to the C200 Web interface, your Web browser displays the Welcome to CTERA page. 1 Choose a user name and password for the administrator. 2 Click Save. The Setup Wizard opens, displaying the Easy Storage Setup dialog box.
Set Up the C200 3 3 Click Next. The following things happen: If the Setup Wizard determines that certain storage configuration changes would be beneficial, the Proposed Actions dialog box appears describing the changes. To accept the configuration, click Next. The Account Details dialog box appears. 4 Connect the C200 to the CTERA Portal, by doing the following: a Select the Yes, I have a CTERA Portal account check box. b In the Portal Address field, type the DNS name of the CTERA Portal.
Set Up the C200 3 The Backup Encryption dialog box appears. 6 Choose I will provide a secret passphrase. My files cannot be accessed without this passphrase. 7 Click Next. The Backup Passphrase dialog box appears. 8 In the Passphrase and Retype passphrase fields, type the passphrase you want to use for accessing your files. Warning Your passphrase is completely confidential, and CTERA does not retain it online or offline.
Set Up the C200 3 The Wizard Completed screen appears. 10 Click Finish.
4 Install and Use CTERA Agent Tip The following procedure describes how to install CTERA Agent on Microsoft Windows. For information on installing CTERA Agent on Linux, refer to the CTERA Agent User Guide. 1 Log in to the C200 Web interface with your administrator user name and password. 2 In the My Computers tab, choose CTERA Agent for Windows, then click Install. The CTERA Agent installer is downloaded to your computer. 3 Run the installer and follow the instructions that appear.
Install and Use CTERA Agent 4 6 In the Username and Password fields, type you user name and password for accessing the C200 Web interface, and click Sign in. The CTERA Agent connects to the C200. A success message appears, and the CTERA Agent icon changes to . 7 Right-click on a folder, and click CTERA backup > Add to backup. The folder is marked with the icon. 8 Click the CTERA Agent tray icon in the notification area of the Windows taskbar. The CTERA Agent screen appears.
5 Back Up Files to the Cloud In this step, you will back up the contents of the disk to the CTERA Portal. 1 In the Configuration tab's navigation pane, click Cloud Backup > Control Panel. The Cloud Backup > Control Panel page appears. 2 Click Backup Now.
Back Up Files to the Cloud 5 A progress bar appears, and the files are backed up to cloud storage. Tip The initial backup may take a long time, depending on the amount of data and Internet connection speeds. Subsequent backups are differential and are significantly faster.
6 Restore Files from Cloud Backup You can restore files and folders to the C200, from the Cloud Backup Control Panel. This can be done by administrators only. For additional restore methods and options, refer to the CTERA C-Series User Guide. 1 In the Configuration tab's navigation pane, click Cloud Backup > Control Panel. The Cloud Backup > Control Panel page appears. 2 Click Restore Files. The Restore Files Wizard opens, displaying the Select Files to Restore dialog box.
Restore Files from Cloud Backup 6 5 If you want to restore files to a location other than the original location: a Click in the Restore to Folder field. The Folder Browser dialog box appears. b Select the folder to which you would like to restore the files. c Click Close. 6 Click Next. The Restore Files dialog box appears.
Restore Files from Cloud Backup 6 The Wizard Completed screen appears. 9 Click Finish. A progress bar appears, and the files are restored from the selected backup.
7 Legal Information Copyright Notice Copyright © 2009-2013 CTERA Networks Ltd. CTERA, C200, C400, CloudPlug, NEXT3, Cloud Attached Storage, CTERA Agent and Virtual Cloud Drive are trademarks, service marks, or registered trademarks of CTERA Networks Ltd.
Legal Information 7 1.
Legal Information 7 6. Term and Termination CTERA shall have the right to terminate this Agreement at any time due to Your breach of this Agreement by providing You with a written notice. Upon CTERA's termination of this Agreement, You shall not be entitled to any compensation, reimbursement or damages of any kind. You shall have the right to terminate this Agreement at any time due to CTERA’s breach of this Agreement by providing CTERA with a written notice.
Legal Information 7 9.2 CTERA shall promptly notify You of any claim subject to indemnification; provided that CTERA's failure to do so shall not affect Your obligations hereunder, except to the extent that CTERA's failure to promptly notify You materially delays or prejudices Your ability to defend the claim.
Legal Information 7 11.4 The failure of CTERA to exercise or enforce any right or provision of this Agreement does not constitute a waiver of such right or provision. If for any reason a court of competent jurisdiction finds any provision or portion of this Agreement to be unenforceable, the remainder of this Agreement will continue in full force and effect. 11.
