User manual

Ctek Z4200 Series SkyRouter
Getting Started
October 11, 2009
Page 6 © 2009 Ctek Inc
Selecting the Over The Air Activation option on either of these screens will cause the actual
activation screen (Figure 26) to be displayed.
Figure 7
Activation Status
– Activated or Not Activated
Network Stability
– Indicates OK For Activation if during the previous two minute sample period
the RSSI is less that (smaller negative number) -99dBm, the SID has not changed, and the unit
has access to 1xRTT connectivity. IOTA and OTAS activations do not currently work for
conditions where the connection is EV-DO only.
Activate
– Causes the unit to contact the network for an over-the-air activation
Status
– Refreshes the current screen so that progress can be monitored.
Details
– Displays a scrolling screen (Figure 27) with low level messages between the unit and
the network. Useful when an activation problem is encountered.
Back
– Return to the Activation Services screen.
Detailed information on IOTA or OTAS activations are covered in the TechNote appropriate for
your network. The Status and Details buttons can be used to monitor the activations progress.