Owner manual

Part Number 91-601-01
Release 1.00
1
Preface
Welcome to the Ctek Series 4200E SkyRouter User’s Guide. The User’s Guide will explain the basic operation of a
SkyRouter and take you through the necessary settings to get your wireless application online. Additional information and
applicable technical notices can be found at www.ctekproducts.com
.
1 Introduction
SkyRouter provides application and network designers with a bridge between the world of IT infrastructure and the
evolving wireless data networks. With SkyRouter the wireless transport is fully integrated into the product’s routing fabric
meaning that you can approach the setup and operation of this product much as with any other IP addressable device.
Wireless considerations are reduced to the absolute minimum necessary to register and make connections on a network.
1.1 Theory Of Operation
The Series 4200E SkyRouter is a complete IP router that routes traffic over LAN Ethernet (10/100baseT) connections.
The wireless features of SkyRouter simply extend the IP routing capabilities to include routing and network address
translation (NAT) over CDMA EV-DO wireless networks. A fallback 1xRTT transport is also provided. As with most routers
Ctek’s Series 4200E SkyRouter can be viewed as having a Local Area Network (LAN) side and a Wide Area Network
(WAN) side. Traffic originating at SkyRouter’s Ethernet ports is considered LAN traffic. The Wide Area Network
connection is over the wireless network’s 1XRTT transport.
1.2 Features
This manual covers SkyRouter (4200E) Release 1.00 and contains the following feature and functions.
1) Ethernet
a. Static Addressing
b. Dynamic (DHCP) Server
c. DHCP Client
d. Configurable DNS address
e. Configurable Gateway, Sub net mask, and Broadcast address
f. Port Forwarding
g. Service management
2) CDMA Interface
a. Enable/Disable Wireless Routing
b. Enable/Disable inbound IP requests
c. Name Server Interoperability with UDP or SMS
d. DDNS Interoperability with BIND or MS Server
e. Administration web server port address selection
f. Enhanced IOTA, OTA and manual activation
g. Home Network Selection
3) Relay Contact Closure (detection and operation)
a. NO/NC detection
b. SMS or email cry out alarm