Owner manual

Part Number 91-601-01
Release 1.00
28
Radio Type
– Indicates the type of programming originally loaded into the radio module. Distinct radio types do not exist
for all networks meaning that a unit operating on a given network may have been repurposed from one of the existing
radio types.
PRL Version
– The Preferred Roaming List (PRL) currently loaded in the radio module.
Firmware Rev
– The revision level of the firmware currently loaded in the radio module.
Hardware Rev
– The revision level of the radio module.
MSID
– Mobile Station Identification (MSID) a second phone number assigned to the module
Current Status Panel
Current Temp
– The temperature currently being sensed by the radio module. Values are in Centigrade.
Activation Status
– Indicates whether or not the SkyRouter has been successfully activated on the serving network.
Network Stability
– Indicates whether or not the current network connection is of adequate quality to perform an OTA
activation.
1xRTT Status Panel
ECIO
– A figure of merit (Ec/Io) describing how well the SkyRouter can hear (forward link) the serving network when all
other traffic and noise on the same channel is considered. Lower numbers indicate a better quality connection. A strong
(small) RSSI does not necessarily equate to a low Ec/Io value.
Channel
– The specific CDMA channel that the SkyRouter is currently using to communicate with the serving network.
EVDO Status Panel – Same as the 1xRTT Status Panel only for the EV-DO bearer.
4.4.2 Ethernet Status
Indicates the current LAN side IP address that the SkyRouter is using. MAC Address is a vendor and machine specific
identification code.
Figure 22