user manual

Part Number 91-007-02

3.2 Connecting The Antenna

The antenna supplied with each SkyRouter should be attached to the SMA style antenna connector described in section

3. The antenna must be connected before powering the unit on.

3.3 Connecting to the Ethernet Port – Administrative Connection

For a direct Ethernet connection between a PC connect to any of the Ethernet ports using a standard or reverse Ethernet

cable. For initial configuration and administration with a PC or workstation Ctek recommends that the PC be set to obtain

an IP address and obtain a DNS address automatically. For Windows PCs make the following settings under the

networking control panel

LAN (Ethernet) Connections - Windows

Figure 3