Operation Manual

36
Use of the Functions
Programming
To use this function, it is necessary to set the parameters relevant to one power save mode.
1. MOTION MODE
1) Set the motion sensor parameters (sensitivity, timeout)  Using the provided software
2) Enable the power save mode with motion sensor  Using the provided software
2. CYCLIC POSITION SMS MODE
1) Enable the cyclic position SMS  Sending an SMS command (wposc)
 Using the provided software
2) Set the phone number  Using the provided software
3) Set the rate for cyclic position SMS  5 minutes  Sending an SMS command (wposc)
 Using the provided software
4) Enable the power save mode with cyclic position SMS  Sending an SMS command (wposc)
 Using the provided software
3. CYCLIC GPRS CONNECTION MODE
1) Set the GPRS parameters  Using the provided software
2) Set the rate for cyclic GPRS connection  5 minutes  Using the provided software
3) Enable the power save mode with cyclic GPRS connection  Using the provided software