Specifications

3. Input/output interface characteristics：
PIN Description Input /Output Electrical characteristics
1 HB OUT Output To provide headlight
2 BAT Input Battery power
3 BAT Input Battery power
4 IGN Input Key ON/OFF 12V , High will be ON, Low will be OFF
5 GND GND
6 NEUTRAL Input NEUTRAL
7 OIL Input OIL
8 Right SW Input Switch the water temperature>>boot pressure>>boot pressure (%)
9 Select SW Input Switch RIDER mode
10 Reset SW Input Switch background color
11 Pass SW Input Ground will be ON, OPEN will be OFF
12 CAN H Input /Output CAN H
13 HB OUT Output To provide headlight
14 FUEL Input Fuel Sensor
15 LB Input 12V, High will be ON, Low will be OFF
16 AIR TEMP Input Atmospheric temperature sensor
17 TURN-L Input 12V, High will be ON, Low will be OFF
18 TURN-R Input 12V, High will be ON, Low will be OFF
19 HB Input Ground will be ON, OPEN will be OFF
20 ETC R Input 5V, H will be ON, L will be OFF
21 ETC G Input 5V, H will be ON, L will be OFF
22 UP SW Input Switch mileage mode
23 DOWN SW Input Switch driving mode
24 CAN L Input /Output Connect vehicle communication system
* When LB is on, HB SW and Pass SW can turn HB light.