User manual

Chapter 1. Introduction
8
1.2 Specification
¾ LAN Interface:
RJ-45 connector
Complying with IEEE 802.3/802.3u/802.3x
10/100 Base-T Auto-Negotiation, Auto-MDI/MDI-X.
¾ VDSL Interface:
RJ-45 connector
DMT Encoding
Complying with ITU-T G993.1/993.2
On-board surge protection
¾ 4-position DIP Switch
¾ LED:
LAN: ACT/LNK, 10/100 Mbps, Half/Full Duplex
VDSL: Power On/Off, CO/CPE, Idle/Trained/Link
¾ Power supply:
DC single 12 Volt over 35mm DC jack
Power consumption: 42 Watt maximum.
1.3 Applications
LAN Extender Application