Product specifications

VDSL. CTC Union
7
3. Hardware description
This section describes the important parts of the converter. It
features the front indicators and rear connectors.
3.1 Front Indicators
The following figure shows the front panel.
Figure Chapter 2.2 Front Indicators
Three LED Indicators.
At a quick glance of the front panel, it will be easy to tell if the
converter has power, if it has signal from its Ethernet RJ-45 port and if
there is phone line signal RJ-11port
Front Indicators
LED Description and Operation
The Converter has three LED indicators.
LEDs Status Descriptions
Ready
(Ready LED)
Steady
Green
It will light up (ON) to show that the
product is power good, and system reset
OK.
Ethernet
(Ethernet LED)
Steady Green
Flashing
(LINK/ACT)
Each RJ45 station port on the Ethernet is
assigned an LED light for monitoring port
“Good Linkage”. LED is normally OFF
after the power on operation, but will light
up steadily to show good linkage. And
Flashing to show data transmission.
VDSL
(VDSL LED)
Steady Green
RJ11 station port on the VDSL is
assigned an LED light for monitoring port
“Good Linkage”. LED is normally OFF
after the power on operation, but will light
up steadily to show good linkage.