User manual

Chapter 4. Configure via Keypad and LCD
4-2
III. Menu Tree
After turning on the SHDTU03, the LCD will prompt SHDSL NTU (E1).
Press Enter to enter. There are five main commands, show status, show
statistics, system setup, write configuration and system diagnostic. For
more detail, refer to each title.
SHDSL NTU
====(E1)====
SHOW
STATUS
SHOW
STATISTIC
SYSTEM
SETUP
WRITE
CONFIGURATION
SYSTEM
DIAGNOSTIC
STATUS
TYPE
STATUS
SHDSL
STATUS
E1
STATISTICS
CURRENT 15MIN
STATISTICS
CURRENT 24HR
STATISTICS
PREVIOUS 15MIN
STATISTICS
PREVIOUS 24HR
STATISTICS
CLEAR ALL
SETUP
TYPE
SETUP
SHDSL
SETUP
E1
*SAVE & REBOOT*
YES
DIAG
LOOPBACK
*SAVE & REBOOT*
NO
Refer to next picture
Refer to next picture
Refer to next picture
Refer to next picture
Refer to next picture
Refer to next picture
Refer to next picture
Refer to next picture
Refer to next picture
Refer to next picture
Refer to next picture
Refer to next picture