User manual
98
Setup E1 Parameter, Pass Through
When SHDSL.bis using 2-pairs(4-wires), the time slot number can only use even number
When setting the E1 channel on PCM31C, PCM31, PCM30C and PCM30, there is also an E1 Pass Through selection item.
Table of Pass through function with user data rate vs. DSL line rate (for 2-wires)
Pass Through :
On
Pass Through :
Off
Channel
Time Slot
number
1
st
Time
Slot
User data
rate
DSL line rate
DSL line rate
PCM31/PCM31C 31 1 31 32 31
PCM30/PCM30C 30 1 30 32 30
PCM31/PCM31C 30 1 30 32 30
PCM30/PCM30C 29 1 29 32 29
PCM31/PCM31C 29 1 29 30 29
PCM30/PCM30C 28 1 28 30 28
PCM31/PCM31C 28 1 28 29 28
PCM30/PCM30C 27 1 27 29 27
PCM31/PCM31C 27 1 27 28 27
PCM30/PCM30C 26 1 26 28 26
PCM31/PCM31C 26 1 26 27 26
PCM30/PCM30C 25 1 25 27 25
PCM31/PCM31C 25 1 25 26 25
PCM30/PCM30C 24 1 24 26 24
PCM31/PCM31C 15 10 15 16 15
PCM30/PCM30C 14 10 14 16 14
PCM31/PCM31C 14 5 14 15 14
PCM30/PCM30C 13 5 13 15 13
PCM31/PCM31C 10 5 10 11 10
PCM30/PCM30C 9 5 9 11 9
PCM31/PCM31C 4 1 4 5 4
PCM30/PCM30C 3 1 3 5 3
PCM31/PCM31C 3 1 3 4 3
PCM30/PCM30C 2 1 2 4 3
PCM31/PCM31C 2 1 2 3 3
PCM30/PCM30C 1 1 1 3 3
PCM31/PCM31C 1 1 1 3 3