User manual

93
To set the SHDSL Margin, move the cursor to margin and press [ENTER]. Select the margin via [TAB] key and key in the Next
margin.
Setup SHDSL parameter, SNR Margin
SNR margin is an index of line connection. You can see the actual SNR margin in STATUS SHDSL. The larger the SNR
margin, the better the line connection. For example, if you set SNR margin in the field as 3, the SHDSL connection will drop
down and reconnect when the SNR margin is lower than 3. The setting range is -10 to 21.
Setup SHDSL parameter, Pair Mode
When using 4-wires (2-pair) model, it will show Pair Mode item here. User can select 1 Pair or 2 Pair for the DSL connection.