User manual

81
4.6.6. SHDTU03b-31T -- E1 + Ethernet Interface mode
Interface
□E1 □Serial □Ethernet □E1+Serial
E1+Ethernet
□T1 □T1+Serial □T1+Ethernet
NTU
Type □STU-R □STU-C-INTCLK □STU-C-EXTCLK
Annex □A □B □F □G
PSD □SYM □ASYM
SNR Margin (-10~21)
SHDSL
Pair Mode □1 Pair □2 pair (For SHDTU03bA-31T only)
Channel □PCM31 □PCM31C □PCM30 □PCM30C □Unframed
Slot Number
First Slot
Code □HDB3 □AMI
AIS □Off □On
E1
Build Outs □75 Ohm □120 Ohm
□Nx64K □T1 mode
Date Rate
Auto Config □Disable □Enable
Duplex □Full □Half
Ethernet
Speed □100M □10M
When SHDSL.bis using 2-pairs(4-wires), the E1 time slot number and Ethernet Nx64K data rate can only use even number.
When E1 framer is PCM31C and PCM30C and set pass through ON, no fractional function can be use.