User manual

4.4.5. SHDTU03b-31 -- E1+Ethernet Interface mode

Interface □E1 □Serial □Ethernet □E1+Serial

E1+Ethernet

NTU

Type □STU-R □STU-C-INTCLK □STU-C-EXTCLK

Annex □A □B □F □G

PSD □SYM □ASYM

SNR Margin (-10~21)

SHDSL

Pair Mode □1 Pair □2 pair (For SHDTU03bA-31 only)

Channel □PCM31 □PCM31C □PCM30 □PCM30C □Unframed

Slot Number

First Slot

Code □HDB3 □AMI

AIS □Off □On

Build Outs □75 Ohm □120 Ohm

□Nx64K □T1 mode

Date Rate

Auto Config □Disable □Enable

Duplex □Full □Half

Ethernet

Speed □100M □10M

When SHDSL.bis using 2-pairs(4-wires), the E1 time slot number and Ethernet Nx64K data rate number can only use even

number

When E1 framer is PCM31C and PCM30C and set pass through ON, no fractional function can be use.