User manual

106
Setup Serial Parameter, Delay
The delay setting is used to cause a delay for CTS to follow RTS. The delay setting may be set 0, 1, 2 or 3 milliseconds. The
default setting is 3 milliseconds.
It works only for the setting:
CTS follow RTS and RTS follow from DTE .
5.4.5. Configure Ethernet parameter
When using the Ethernet interface mode, select the Ethernet item and press [ENTER] or [RIGHT].
The Ethernet settings include the data rate plus the port setting between auto-negotiation (default) or forced mode for duplex
and speed.