Specifications

98
Read_Only Access read only
Read_Write Access read and write
Denied Deny all access
Move the cursor to list and press enter, you can view full listing on SNMP Community Pool.
5 entries of SNMP trap are allowed to be configured in this system.
SNMP Community:
SNMP entry(1~5)
Validate □
□□
□Enable □
□□
□Disable
Community
Access Right : □
□□
□Read only □
□□
□Read Write □
□□
□Denied
4.10.3.2 Trap host
There have 5 entries of SNMP trap are allowed to be configured in this system. Move the
cursor to trap and press enter.
----------------------------------------------------------------------
Command: admin snmp trap <1~5> <more...>
Message: Please input the following information.
Trap host entry number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow:
>> edit Edit trap host parameter
list Show trap configuration
Move the cursor to edit and press enter, you can setup the following:
-----------------------------------------------------------------------------
Command: admin snmp trap 1 edit <Disable|1|2> <ip> <string>
Message: Please input the following information.
Version (TAB Select) <Disable>:
Trap host IP address (ENTER for default) <192.168.0.254>:
Community (ENTER for default) <private>:
-----------------------------------------------------------------------------
Version: Disable, Version 1 or Version 2
Trap host IP address: Type the trap host IP address
Community: Type the community password (string)
Move the cursor to list and press enter, you can view full listing on SNMP Trap Host Pool.