Specifications

85
4.4.5 RATE
Move the cursor " >> " to Rate and press enter.
-----------------------------------------------------------------------------
>> port Modify port rate
list Show Rate Control configuration
-----------------------------------------------------------------------------
Select which port you want to modify and then set up the data rate.
-----------------------------------------------------------------------------
Command: setup rate port <1~6> <no_limit|128K|256K|512K|1M|2M>
Message: Please input the following information.
Port index <1~6>: 1
rate (TAB Select) <no_limit>:
-----------------------------------------------------------------------------
Setup data rate per port:
Port 1
LAN1 □
□□
□No limit □
□□
□128K □
□□
□256K □
□□
□512K □
□□
□1M □
□□
□2M
Port 2
LAN2 □
□□
□No limit □
□□
□128K □
□□
□256K □
□□
□512K □
□□
□1M □
□□
□2M
Port 3
LAN3 □
□□
□No limit □
□□
□128K □
□□
□256K □
□□
□512K □
□□
□1M □
□□
□2M
Port 4
LAN4 □
□□
□No limit □
□□
□128K □
□□
□256K □
□□
□512K □
□□
□1M □
□□
□2M
Port 5
DSL □
□□
□No limit □
□□
□128K □
□□
□256K □
□□
□512K □
□□
□1M □
□□
□2M
Port 6
Sniffing □
□□
□No limit □
□□
□128K □
□□
□256K □
□□
□512K □
□□
□1M □
□□
□2M
4.4.6 MGMT
Move the cursor " >> " to mgmt and press enter.
MGMT interface parameters can be configured MGMT IP address and subnet mask.
----------------------------------------------------------------------
Command: setup mgmt <1~1> <more...>
Message: Please input the following information.
Interface number <1~1>:
----------------------------------------------------------------------
The EFM modem only has one MGMT interface can use, so that use the default interface
number is 1. The default IP address and subnet mask are 196.168.1.1 and 255.255.255.0 .
>> address MGMT IP address and subnet mask