Specifications

81
4.4.4.2 Queue weight
This setting can set weight value on each queue.
-----------------------------------------------------------------------------
Command: setup qos qweight <0~3> <1~15>
Message: Please input the following information.
Queue index <0~3>: 0
Weight value (ENTER for default) <1>: 1
-----------------------------------------------------------------------------
For example, the default values are as following
[ setup qos qweight 0 1]
[ setup qos qweight 1 2]
[ setup qos qweight 2 4]
[ setup qos qweight 3 8]
Queue Weight:
Queue Index 0 1 2 3
Weight Value
4.4.4.3 Queue schedule
There are two type queue schedule: Type 1 and type 2 for your selection.
The schedule types according to following table:
Queue 0 Queue 1 Queue 2 Queue 3
Type 1 WRR WRR WRR WRR
Type 2 BE BE BE SP
-----------------------------------------------------------------------------
Command: setup qos qSchdl <Type1|Type2|>
Message: Please input the following information.
Operation type (TAB Select) <Type1>: Type1
-----------------------------------------------------------------------------
The queuing algorithms:
WRR Weight Round Robin
BE Best Effort
SP Strictly Priority