Specifications
78
4.4.3.2 802.11Q VLAN
To modify the VLAN rule, move the cursor to modify and press enter.
--------------------
----------------------------------------
--------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------
------------------------------------------------------
Command: setup vlan modify <1~8> <0~4094> <string>
Command: setup vlan modify <1~8> <0~4094> <string> Command: setup vlan modify <1~8> <0~4094> <string>
Command: setup vlan modify <1~8> <0~4094> <string>
Message: Please input the following information.
Message: Please input the following information. Message: Please input the following information.
Message: Please input the following information.
VLAN table entry index <1~8>: 1
VLAN table entry index <1~8>: 1VLAN table entry index <1~8>: 1
VLAN table entry index <1~8>: 1
VID value (ENTER for default) <1>: 10
VID value (ENTER for default) <1>: 10 VID value (ENTER for default) <1>: 10
VID value (ENTER for default) <1>: 10
VLAN port membership (ENTE
VLAN port membership (ENTE VLAN port membership (ENTE
VLAN port membership (ENTER for default) <111111>:
R for default) <111111>:R for default) <111111>:
R for default) <111111>:
--------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------
The VLAN Port membership represents with string 1 or 0.
VLAN port membership is a 6-digit binary number in which bit 0 to bits 5 represents LAN1 to
LAN4, DSL and Sniffing ports respectively.
For example: [ setup vlan modify 1 10 111111 ] means use index as 1 , VID = 10 and all six ports
are as same membership (VLAN ID=10).
Use PVID command to change the member port to untagged members:
--------------------
----------------------------------------
--------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------
------------------------------------------------------
Command: setup vlan pvid <1~6> <1~4094>
Command: setup vlan pvid <1~6> <1~4094> Command: setup vlan pvid <1~6> <1~4094>
Command: setup vlan pvid <1~6> <1~4094>
Message: Please input the following information.
Message: Please input the following information. Message: Please input the following information.
Message: Please input the following information.
Port index <1~6>:
Port index <1~6>: Port index <1~6>:
Port index <1~6>:
VID value (ENTER for default) <1>:
VID value (ENTER for default) <1>:VID value (ENTER for default) <1>:
VID value (ENTER for default) <1>:
-------------------------------------------------------
--------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------
--------------------------------------
-------------------
PVID (Port VID) : It is an untagged member from 1 to 4094 of default VLAN.
For example:
[ set vlan pvid 1 100]
[ set vlan pvid 2 100]
[ set vlan pvid 3 100]
[ set vlan pvid 4 100]
[ set vlan pvid 5 100]
[ set vlan pvid 6 100]
Those means all untagged on all ports are as same membership (VLAN ID=100)
To modify the link type of the port, move the cursor to link_mode and press enter. There are
two types of link: access and trunk. Trunk link will send the tagged packet form the port and
Access link will send un-tagged packet form the port. The port index 1 to 4 represents LANs
ports, index 5 represents DSL and index 6 represents Sniffing respectively.
--------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------
Command: set
Command: set Command: set
Command: setup vlan link_mode <1~6> <Access|Trunk>
up vlan link_mode <1~6> <Access|Trunk>up vlan link_mode <1~6> <Access|Trunk>
up vlan link_mode <1~6> <Access|Trunk>
Message: Please input the following information.
Message: Please input the following information. Message: Please input the following information.
Message: Please input the following information.
Port index <1~6>: 1
Port index <1~6>: 1 Port index <1~6>: 1
Port index <1~6>: 1
Port link type (TAB Select) <Access>:
Port link type (TAB Select) <Access>: Port link type (TAB Select) <Access>:
Port link type (TAB Select) <Access>:
--------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------