Specifications

69
The following figure gives you an example of the menu driven interface. In the menu, you
scroll up/down by pressing key I / K ; select one command by key L, and go back to a higher
level of menu by key J ; you also can scroll to top/bottom by pressing Key U/O. For example,
to show the system information, just logon to the EFM Modem, move the cursor down by
pressing key K twice and select "show" command by key L, you shall see a submenu and
select "system" command in this submenu, then the system will show you the general
information. You may press the Enter key to select a command the same as key L.
4.1.4 Window structure
From top to bottom, the window is divided into four parts:
Product name: SHDSL.bis EFM Bridge
Menu field: Menu tree prompts on this field. Symbol ">>" indicates the cursor place.
Command field: You will configure the parameters in this field. < parameters > indicates the
parameters you can choose and < more…> indicates that there is a submenu in the title.
Operation filed: help commands
4.2 Main Menu Tree
The main menu tree is shown in the following figure. All of the configuration commands are
placed in the subdirectories of Enable protected by supervisor password. Unauthorized user
cannot change any configurations but can view the status and configuration of the EFM
Modem and use ping command to make sure the EFM modem is working.