Specifications

60
3.7.2.2 Trap Host Pool
In the table of current trap host pool, you may also setup the trap host. SNMP trap is an
unsolicited informational message sent from an SNMP agent to a manager. The management
station (SNMP application) receives traps. The trap host pool is the list of managers to which
traps will be sent. If no trap host pool is defined, no traps are sent.
Press Modify to set up trap host pool.
Version: select version for trap host. (Version 1 is for SNMPv1; Version 2 for SNMPv2).
Disable turns off trap generation
IP Address: type in the trap host IP address
Community: type in the community password.
Press OK to finish the setup.
The browser will display the configured parameters. Double check them before writing into
NVRAM.
Press Restart to restart the EFM modem working with the new parameters or press Continue
to setup other parameters.