Specifications

57
Legal address pool will setup the legal IP addresses from which authorized persons can
configure the EFM modem. This is the most secure method for network administrators to
setup the authorized configuration administrators by allowing only preset IP source
addresses of trusted hosts.
Configured as 0.0.0.0 will allow all hosts on Internet or LAN to access the EFM modem.
Leaving blank the trust host list will cause blocking of all PC from WAN to access the EFM
modem. In this case, only PC in LAN can access the EFM modem. If you type the exact IP
address in the field, only that host can access the EFM modem.
Click Finish to complete the setting.
The browser will display the configured parameters for review. Check and confirm before
writing into NVRAM.
Press Restart to restart the EFM modem working with the new parameters or press Continue
to setup other parameters.