Specifications

19
3.2 Installation
The following guide is designed to lead users through Web Configuration of G.shdsl.bis EFM
Modem in the easiest and quickest way possible. Please follow the instructions carefully.
Connect the power adapter to the port labeled DC 9V on the rear panel of the EFM modem.
Connect the Ethernet cable to MGMT port.
(Note: The EFM modem supports auto-MDIX so both straight through and cross-over Ethernet
cables can be used.)
Connect the phone cable to the EFM modem and the other side of phone cable to wall jack.
Connect the power adapter to power source.
Turn on the PC or NB, which will be used for configuration of the EFM modem.
!
To avoid possible damage to this EFM modem, do not turn on the EFM modem before
Hardware Installation.
Connection with SHDSL .Bis EFM Modem