Product specifications

8
1.3 Specifications
WAN Interface
• Line Rate: SHDSL per G.991.2
• Coding: trellis coded pulse amplitude modulation (TCPAM-16)
• Support: Annex A(ANSI) and Annex B(ETSI)
• Payload rates: 64kbps to 2.304Mbps (N x 64kbps N=1 to 36) for Data and Ethernet interface
64kbps to 2.048Mbps (N x 64kbps N=1 to 32) for E1 interface
• Connection: RJ-45 jack (2-wire)
• Impedance: 135 ohms
G.703 Interface (as E1)
• Connection: RJ-45 for balanced 120Ω E1 cable
• Connection: BNC for unbalanced 75Ω E1 cable
• Line Rate: 2048KHz +/- 50ppm
• Framing: PCM30/30C/31/31C and Unframed
• Data Rate: 64Kbps to 2.048Mbps (Nx64Kbps , N=1 to 32)
• Operation: Full E1 and Fractional E1
DATA Interface (as V.35)
• Connection:DB-25(F)
• Payload rates: Up to 2.304Mbps (N=1 to 36)
• Supports RS-530, V.35 or V.36/X.21
LAN Interface (as Ethernet)
• Single Ethernet Interface
• 10/100Mpbs Half/Full Duplex, Auto-sensing, Auto-Crossover
• Up to 2048 MAC address learning
DSL Timing
• Internal
• From E1 Recovery (as E1)
• From DTE (as V.35 and Ethernet)
Performance Monitoring
• ES, SES, UAS, LOSW, Alarms, Errors
Loopback Tests (for E1 and V.35 interface only)
• Digital Local Loopback
• Digital Loopback
• Remote Line Loopback
• Remote Payload Loopback
• Far-end Line Loopback
• Far-end Payload Loopback
• V.54(For V.35 interface only)
• Build-in 2047 bit (2
11
-1) BER tester
Management
• Configuration with keypads and LCD display
• Console port (RJ45)
• Support firmware upgradeable
Physical/Electrical
• Dimensions: 19.5 x 4.8 x 16.8 cm
• Input: For AC power input version 100 to240Vac with 50 to 60Hz
For DC Power input version -36 to72Vdc
• Power Consumption: 12W Max
• Operation temperature: 0 to 35°C
• Humidity: Up to 95% (non-condensing)
• External screw for frame grounding