Product specifications

67
Setup Data Parameter, DSR
The behavior of the DSR (Data Set Ready) signal may be set in one of three ways. When set 'on', the DSR
signal is always forced high (on, positive voltage or SPACE), when set 'off' the signal is always forced low
(off, negative voltage or MARK), or DSR will follow DTR (Data Terminal Ready) condition of 'on' for DTR on or
'off' for DTR off. The default setting for DSR is ON.
Setup Data Parameter, DCD
The behavior of the DCD (Data Carrier Detect) signal may be set in one of three ways. When set 'on', the
DCD signal is always forced high (on, positive voltage or SPACE), when set 'off' the signal is always forced
low (off, negative voltage or MARK), or DCD will follow the DSL condition of 'on' for DSL link or 'off' for DSL
no link. The default setting for DCD is to follow the DSL link status.