Product specifications

66
Setup Data Parameter, RTS
The behavior of the RTS (Request To Send) signal may be set in one of two ways. When set 'on', the RTS
signal is always forced high (on, positive voltage or SPACE), when set 'from DTE' the RTS signal will follow
the DTE's condition. The default setting for RTS is ON.
Setup Data Parameter, CTS
The behavior of the CTS (Clear To Send) signal may be set in one of three ways. When set 'on', the CTS
signal is always forced high (on, positive voltage or SPACE), when set 'off' the signal is always forced low
(off, negative voltage or MARK), or CTS will follow RTS (Request To Send) condition of 'on' for RTS on 'off'
for RTS off. The default setting for CTS is to follow RTS.