Product specifications

4 Configuration with Console Port

This chapter will deal with the specifics of configuration and operation of this product via console port with a

terminal emulation program. The configuration of G.SHDSL NTU is performed via a menu-driven embedded

software, using a standard ASCII terminal or a PC running a terminal emulation application connected to the

rear panel CONSOLE port.

Windows includes a terminal emulation program called HyperTerminal. Since Microsoft discontinued

including HyperTerminal from the introduction of Vista OS, search and download an alternate emulator such

as "TeraTerm" or "PuTTY". Connect the appropriate communication port from the PC to this device using the

cable provided with this modem. After the physical connection is made, you are ready to configure this

product. Make sure you have connected the supplied RS-232C Data cable (DB9F to RJ-45 Plug) to the

console port on the rear panel on this product.

Run the terminal emulation program such as Hyper Terminal with the following setting:

Emulation: VT-100 compatible

Band rate: 115200, Data bits: 8, Parity: None, Stop Bits:1 , Flow Control: None

4.1 Login Procedure

At the start up screen, you will see: