User manual

Chapter 8. Configuration Commands
8-20
To modify the fixed IP address mapping, move the cursor “>>” to the fixed command and press
enter.
>> modify Modify fixed NAT mapping
interface Bind address pair to specific interface
delete Delete fixed NAT mapping
list Show fixed IP address mapping
You can create up to 10 fixed NAT mapping entries via the range command.
----------------------------------------------------------------------
Command: setup ip_share nat fixed modify <1~1o> <ip> <ip>
Message: Please input the following inf ormation.
Fixed NAT mapping entry number <1~10>: 1
Local address: 192.168.0.250
Global address: 122.22.22.2
----------------------------------------------------------------------
After configuration of fixed IP address entries, you can bind the entry to specific interface via the
interface command.
----------------------------------------------------------------------
Command: setup ip_share nat fixed interface <1~5> <1~8>
Message: Please input the following information.
Fixed NAT mapping entry number < 1~5>: 1
Active interface number (Enter for default) <1~8>: 1
----------------------------------------------------------------------
You can delete fixed NAT mapping entries- from 1 to 5- by using the delete command.
You can view the fixed NAT mapping entry via the list command.