User manual

Chapter 8. Configuration Commands
8-6
5 SNMP trap entry can be configured in this system. Move the cursor to trap and press enter.
----------------------------------------------------------------------
Command: admin snmp trap <1~5> <more...>
Message: Please input the following information.
Trap host entry number <1~5> : 2
-------------------------------- --------------------------------------
The screen will prompt as follows:
>> edit Edit trap host parameter
list Show trap configuration
Supervisor Password and ID
The supervisor password and ID are the last door for security but the most important. Users who
access the router via web browser, console port or Telent have to use the ID and password to
configure the router. It is strongly suggested to change the ID and password.
SNTP
Time synchronization is an essential element for any business that relies on an IT system. The
reason for this is that these systems all have clocks that are the source of time for files or
operations they handle. Without time synchronization, time on these systems varies with each
other or with the correct time and this can cause virtual server schedule processes to fail and
system log exposures with wrong data.
There are two methods to synchronize time, synchronize with PC or SNTPv4. If you choose to
synchronize with a PC, the router will synchronize with a PC. If you choose SNTPv4, the router
will use the protocol to synchronize with an Internet time server.
Move the cursor “ >> “ to sntp and press enter.
>> method Select time synchronization method
service Trigger SNTP v4.0 service
time_server1 Configure time s erver 1
time_server2 Configure time server 2
time_server3 Configure time server 3
updaterate Configure update period
time_zone Configure GMT time zone offset
list Show SNTP configuration