User manual

Chapter 8. Configuration Commands
8-4
User Profile
You can use the user command to clear, modify and list all the user profiles. You can setup up to
five users to access the router via console port or Telnet in the user profile table. However users
who have the supervisor password can change the configuration of the router. Move the cursor “
>> “ to user and press enter key.
>> clear Clear user pro file
modify Modify the user profile
list List the user profile
You can delete the user by number using the clear command. If you do not know the user
number, you can use the list command to check it. The Modify command is used to modify old
user information or add a new user to user profile.
To modify or add a new user, move the cursor to modify and press enter.
----------------------------------------------------------------------
Command: admin user modify <1~5> <more...>
Message: Please input the following information.
Legal access user profile number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow.
>> Attrib UI mode
Profile User name and password
There are two UI modes, command line and menu mode, to setup the SHDTU03. We will not
discuss the command line interface (CLI) in this manual.