User manual

Chapter 4. Administration
4-3
SNMP status: Enable
Access Right: Deny for deny all
access
Access Right: Read for access
read only
Access Right: Write for access
read and write.
Community: it serves as
password for access right.
After configuring the community
pool, press OK.
Click Modify to modify the trap
host pool.
Version: select version for trap
host.
IP: type the trap host IP
Community: type the
community password.
Press OK to finish the setup.
The browser will prompt with the configuration parameters. Check them before writing to Flash.
Press Restart to restart the gateway with the new parameters and press Continue to setup other
parameters.